Default Telephone Programming for Nortel 1120e

To enter programming mode on the 1120e
press the services key twice


==============================

enable 802.1x (EAP): blank
Device ID: blank
Password: blank
Enable 802.1ab (LLDP): yes


DHCP: YES


DHCP: NO
SET IP: x.x.x.x
Net Mask: x.x.x.x
Gateway: x.x.x.x

S1 IP: 205.205.231.31
PORT: 5000
S1 Action: 1 Retry 5
S1 PK: ffffffffffffffff (16 f's)
S2 IP: 205.205.231.28
PORT: 5000
S2 Action: 1 Retry: 15
S2 PK: ffffffffffffffff (16 f's)
VoiceVlLAN: no VLAN
VLAN Filter: blank
Disable PC Port: blank
Data VLAN: no VLAN
PC-Port UnTag All: blank
Duplex: auto
Ignore GARP: blank
Enable PSK Srtp: blank
XAS IP: 0.0.0.0
Graphical XAS: yes
Port: blank
TFTP IP: 10.1.1.243